Surface Mount Mixers - T3 High Linearity
The T3 mixer, available in both hybrid and MMIC form, is the most advanced mixer circuit in the world with broad, overlapping RF, LO and IF bands and extremely high linearity. These mixers offer increased IMD suppression and spurious suppression with decreasing LO rise time, achievable through either increasing sine wave LO drive or using a square wave LO.
<
|
>
|
<
|
>
|
<
|
>
|
<
|
>
|
>
|
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| T3
| 0.001 | 7 | 0.001 | 4 | 15 | 25 | 6.5 | 32 | 32 | ADM-0026-5929SM | 10.16 x 8.13 mm | Released | |||
| T3
| 0.001 | 7 | 0.001 | 4 | 15 | 25 | 6.5 | 32 | 32 | ADM-0026-5929SM | 10.16 x 8.13 mm | Released | |||
| T3
| 0.001 | 7 | 0.001 | 4 | 17 | 27 | 6.5 | 32 | 32 | ADM-0026-5929SM | 10.16 x 8.13 mm | Released | |||
| T3
| 0.001 | 7 | 0.001 | 4 | 17 | 27 | 6.5 | 32 | 32 | ADM-0026-5929SM | 10.16 x 8.13 mm | Released | |||
| T3
| 0.01 | 12 | 0.001 | 4 | 17 | 27 | 7.5 | 30 | 30 | ADM-0026-5929SM | 10.16 x 8.13 mm | Released | |||
| T3
| 0.01 | 12 | 0.001 | 4 | 15 | 25 | 7.5 | 30 | 30 | ADM-0026-5929SM | 10.16 x 8.13 mm | Released | |||
| T3
| 0.01 | 12 | 0.001 | 4 | 17 | 27 | 7.5 | 30 | 30 | ADM-0026-5929SM | 10.16 x 8.13 mm | Released | |||
| T3
| 0.01 | 12 | 0.001 | 4 | 15 | 25 | 7.5 | 30 | 30 | ADM-0026-5929SM | 10.16 x 8.13 mm | Released | |||
| T3
| 1.5 | 13 | 0.25 | 5 | 15 | 25 | 8.5 | 39 | 31 | ADM-0026-5929SM | 4 x 4 mm | Released | |||
| T3
| 1.5 | 13 | 0.01 | 7 | 16 | 24 | 7.5 | 40 | 30 | ADM-0026-5929SM | 10.16 x 8.13 mm | Released | |||
| T3
| 1.5 | 13 | 0.01 | 7 | 16 | 24 | 7.5 | 40 | 30 | ADM-0026-5929SM | 10.16 x 8.13 mm | Released | |||
| T3
| 1.5 | 13 | 0.01 | 7 | 22 | 30 | 8.5 | 40 | 36 | ADM-0026-5929SM | 10.16 x 8.13 mm | Released | |||
| T3
| 1.5 | 13 | 0.01 | 7 | 11 | 24 | 7.5 | 40 | 24 | ADM-0026-5929SM | 10.16 x 8.13 mm | Released | |||
| T3
| 1.5 | 13 | 0.5 | 8.5 | 5 | 15 | 9.5 | - | 28 | - | 6 x 6 mm | Released | |||
| T3
| 1.5 | 13 | See plot | See plot | 11 | 25 | 7.5 | 43 | 27 | ADM-0026-5929SM | 4 x 4 mm | Released | |||
| T3
| 1.5 | 13 | 0.8 | 8.5 | 7 | 15 | 8 | 42 | 22 | ADM-0026-5929SM | 4 x 4 mm | Released | |||
| T3
| 1.5 | 13 | 0.8 | 8.5 | 16 | 24 | 8 | 37 | 30 | ADM-0026-5929SM | 4 x 4 mm | Released | |||
| T3
| 0.01 | 18 | 0.001 | 10 | 15 | 25 | 8 | 25 | 28 | ADM-0026-5929SM | 8.13 x 8.13mm | Released | |||
| T3
| 0.01 | 18 | 0.01 | 18 | 15 | 25 | 9.5 | 30 | 32 | ADM-0026-5929SM | 8.13 x 8.13mm | Released | |||
| T3
| 0.01 | 18 | 0.01 | 18 | - | - | 9.5 | See plot | 32 | ADM-0026-5929SM | 8.13 x 8.13mm | Released | |||
| T3
| 0.01 | 18 | 0.001 | 10 | 15 | 25 | 8 | 25 | 28 | ADM-0026-5929SM | 8.13 x 8.13 mm | Released | |||
| T3
| 0.01 | 18 | 0.01 | 18 | 15 | 25 | 9.5 | 30 | 32 | ADM-0026-5929SM | 8.13 x 8.13mm | Released | |||
| T3
| 0.01 | 18 | 0.01 | 18 | 15 | 25 | 9.5 | See plot | 32 | ADM-0026-5929SM | 8.13 x 8.13mm | Released | |||
| T3
| 0.01 | 20 | 0.001 | 10 | 15 | 25 | 7.5 | 25 | 27 | ADM-0026-5929SM | 8.13 x 8.13 mm | Released | |||
| T3
| 0.01 | 20 | 0.01 | 18 | 15 | 25 | 9.5 | 30 | 32 | ADM-0026-5929SM | 8.13 x 8.13mm | Released | |||
| T3
| 0.01 | 20 | 0.001 | 10 | 15 | 25 | 7.5 | 25 | 27 | ADM-0026-5929SM | 8.13 x 8.13 mm | Released | |||
| T3
| 0.01 | 20 | 0.01 | 18 | 15 | 25 | 9.5 | 30 | 32 | ADM-0026-5929SM | 8.13 x 8.13mm | Released | |||
| T3
| 0.01 | 20 | 0.01 | 18 | 15 | 25 | 9.5 | 30 | 32 | ADM-0026-5929SM | 8.13 x 8.13mm | Released | |||
| T3
| 0.01 | 20 | 0.01 | 18 | 15 | 25 | 9.5 | 30 | 32 | ADM-0026-5929SM | 8.13 x 8.13mm | Released | |||
| T3
| 3 | 25 | 6 | 6 | 17 | 23 | 7.8 | 34 | 29 | ADM-8007PSM | 4 x 4 mm | Released |