Legacy Hybrid Mixer Spur Values
By Marki Microwave, Posted Tue Jan 30 2018 20:00:00 GMT+0000 (Coordinated Universal Time)
THE SPUR NUMBERS below represent the typical numbers one would see for downconversion. The numbers shown are for a -10 dBm input. The spur suppression is decreased for lower RF power levels by (n-1). For example if the 2RF x 2LO spur is typically 40 dBc for a -10 dBm input, then for a -20 dBm input the level is (2-1) x 10 dB lower, or 50 dBc.
Double-Balanced: M1/M4/M8/M9
Spurious Suppression (Typical) – dBc
Triple-Balanced: M2’s – Sine-Wave LO-Drive
Spurious Suppression (Typical) – dBc
Triple-Balanced: M2’s – Square Wave LO-Drive
Spurious Suppression (Typical) – dBc
Related Application Notes
The Self-Alignment of Reflowed Surface Mount Components
By Marki Microwave
|Published on: Mon Jan 22 2018 20:00:00 GMT+0000 (Coordinated Universal Time)
LO to RF Isolations: Why a 10 dB Buffer is Best
By Jacob Hammond
|Published on: Thu Sep 22 2022 19:00:00 GMT+0000 (Coordinated Universal Time)
Noise Figure and Receiver Sensitivity Explained: Practical RF Design for Low-Noise Systems
By Doug Jorgesen
|Published on: Thu Sep 04 2025 22:49:00 GMT+0000 (Coordinated Universal Time)