Port Diagram
A top-down x-ray view of the MDPXN-0407PSM01 package outline drawing is shown below. Input to the diplexer is on Pin 9, Pin 4 will be the output after passing through the HPF and Pin 13 will be the output after passing through the LPF.
Sales: 408-778-9952 | General: 408-778-4200 | Fax: 408-778-4300
Sales & Customer Support: [email protected]
Tech Support: [email protected]
Device Overview
General Description
The MDPXN-0407PSM01 is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 4 GHz and high frequency 7 to 26.5 GHz signals. Passive GaAs MMIC technology allows production of smaller filter constructions that replace larger form factor circuit board constructions. Tight fabrication tolerances allow for less unit-to-unit variation than traditional filter technologies. The MDPXN-0407PSM01 is available as a 3x3mm QFN. Low unit to unit variation allows for accurate simulations using the provided S3P file taken from measured production units.
Features
- Excellent Return Loss
- 5.5 GHz Crossover Point
- High Stop Band Suppression
- Reflectionless Filter
Applications
- Satellite Communications
- Reflectionless Filter Applications
- Electronic Warfare
Functional Block Diagram
Part Ordering Options
| Part Number | Description | Package | Green Status | Product Lifecycle | Export Classification |
|---|---|---|---|---|---|
| MDPXN-0407PSM01 | Passive MMIC 0 - 26.5 GHz Diplexer/Reflectionless Filter | QFN | RoHS REACH | Released | EAR99 |
| Part Number | Description | Package | Green Status | Product Lifecycle | Export Classification |
|---|---|---|---|---|---|
| MDPXN-0407PSM01 | Passive MMIC 0 - 26.5 GHz Diplexer/Reflectionless Filter | QFN | RoHS REACH | Released | EAR99 |
MDPXN-0407PSM01
Passive MMIC 0 - 26.5 GHz Diplexer/Reflectionless Filter
Table Of Contents
- Device Overview
- Port Configuration and Functions
- Revision History
- Specifications
- Operation
- Mechanical Data
- Footprint Image
Revision History
| Revision Code | Revision Date | Comment |
|---|---|---|
| PRE | 2023-12-04 | Datasheet Pre-Release |
MDPXN-0407PSM01
Passive MMIC 0 - 26.5 GHz Diplexer/Reflectionless Filter
Port Configuration and Functions
Port Functions
| Port | Function | Description | DC Equivalent Circuit |
|---|---|---|---|
| Pad | Ground | PSM package ground path is provided through the substrate and ground bond pads. |  |
| Pin 13 | RF Low Band | Pin 13 is DC short to Pin 9 and open to GND and Pin 4. |  |
| Pin 4 | RF High Band | Pin 4 is DC short to GND and open to the other ports. |  |
| Pin 9 | Common/Input | Pin 9 is DC short to Pin 13 and open to GND and Pin 4. | |
MDPXN-0407PSM01
Passive MMIC 0 - 26.5 GHz Diplexer/Reflectionless Filter
Specifications
Absolute Maximum Ratings
The Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. All Absolute Maximum Ratings are individual and should not be met in parallel. If these limits are exceeded, the device may be inoperable or have a reduced lifetime.
| Parameter | Maximum Rating | Unit |
|---|---|---|
| Maximum Operating Temperature | 100 | °C |
| Maximum Storage Temperature | 100 | °C |
| Minimum Operating Temperature | -65 | °C |
| Minimum Storage Temperature | -65 | °C |
| RF Power Handling | 30 | dBm |
Package Information
| Parameter | Details | Rating |
|---|---|---|
| ESD | < 50 Volts | HBM 0Z |
| Dimensions | - | 3 x 3 mm |
| Moisture Sensitivity Level | - | MSL 1 |
MDPXN-0407PSM01
Passive MMIC 0 - 26.5 GHz Diplexer/Reflectionless Filter
Electrical Specifications
The electrical specifications apply at TA=+25°C in a 50Ω system. Typical data shown is for the filter in a PSM package with a sine wave input applied to Pin 9 . Min and Max limits are guaranteed between TA=-50°C and TA=+100°C.
| Parameter | Test Conditions | Minimum Frequency (GHz) | Maximum Frequency (GHz) | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|---|
| 1 dBc High Passband | - | - | - | 7 | - | 26.5 | GHz |
| 1 dBc Low Passband | - | - | - | 0 | - | 4 | GHz |
| 30 dBc Low Pass Rejection Point | DC to 3 | 0 | 3 | - | 53 | - | dB |
| Common Port Return Loss | 7 to 26.5 GHz | 7 | 26 | 9 | 14 | - | dB |
| Common Port Return Loss | DC to 4 GHz | 0 | 4 | - | 23 | - | dB |
| High Pass Filter, Pass Band Insertion Loss | 7 to 26.5 GHz | 7 | 26.5 | - | 0.9 | 4.2 | dB |
| High Pass Filter, Pass Band Return Loss | 7 to 26.5 GHz | 7 | 26.5 | - | 14 | - | dB |
| Impedance | - | - | - | - | 50 | - | Ω |
| Isolation | 3 to 4 GHz | 3 | 4 | - | 20 | - | dB |
| Isolation | 4 to 7 GHz | 4 | 7 | 10 | - | - | dB |
| Isolation | 7 to 26.5 GHz | 7 | 26.5 | - | 38 | - | dB |
| Isolation | DC to 3 GHz | 0 | 3 | - | 38 | - | dB |
| Low Pass Filter, Pass Band Insertion Loss | DC to 4 GHz | 0 | 4 | - | 0.9 | 3.9 | dB |
| Low Pass Filter, Pass Band Return Loss | DC to 4 GHz | 0 | 4 | - | 24 | - | dB |
| Low Pass Filter, Stop Band Rejection | 7 to 26.5 | 7 | 26.5 | - | 42 | - | dB |
| Parameter | Test Conditions | Minimum Frequency (GHz) | Maximum Frequency (GHz) | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|---|
| 1 dBc High Passband | - | - | - | 7 | - | 26.5 | GHz |
| 1 dBc Low Passband | - | - | - | 0 | - | 4 | GHz |
| 30 dBc Low Pass Rejection Point | DC to 3 | 0 | 3 | - | 53 | - | dB |
| Common Port Return Loss | 7 to 26.5 GHz | 7 | 26 | 9 | 14 | - | dB |
| Common Port Return Loss | DC to 4 GHz | 0 | 4 | - | 23 | - | dB |
| High Pass Filter, Pass Band Insertion Loss | 7 to 26.5 GHz | 7 | 26.5 | - | 0.9 | 4.2 | dB |
| High Pass Filter, Pass Band Return Loss | 7 to 26.5 GHz | 7 | 26.5 | - | 14 | - | dB |
| Impedance | - | - | - | - | 50 | - | Ω |
| Isolation | 3 to 4 GHz | 3 | 4 | - | 20 | - | dB |
| Isolation | 4 to 7 GHz | 4 | 7 | 10 | - | - | dB |
| Isolation | 7 to 26.5 GHz | 7 | 26.5 | - | 38 | - | dB |
| Isolation | DC to 3 GHz | 0 | 3 | - | 38 | - | dB |
| Low Pass Filter, Pass Band Insertion Loss | DC to 4 GHz | 0 | 4 | - | 0.9 | 3.9 | dB |
| Low Pass Filter, Pass Band Return Loss | DC to 4 GHz | 0 | 4 | - | 24 | - | dB |
| Low Pass Filter, Stop Band Rejection | 7 to 26.5 | 7 | 26.5 | - | 42 | - | dB |
MDPXN-0407PSM01
Passive MMIC 0 - 26.5 GHz Diplexer/Reflectionless Filter
Typical Performance Plots
Typical performance plots are evaluation board measurements with fixturing to the device pads de-embedded.
MDPXN-0407PSM01
Passive MMIC 0 - 26.5 GHz Diplexer/Reflectionless Filter
MDPXN-0407PSM01
Passive MMIC 0 - 26.5 GHz Diplexer/Reflectionless Filter
Mechanical Data
MDPXN-0407PSM01
Passive MMIC 0 - 26.5 GHz Diplexer/Reflectionless Filter
Footprint Image
Download : Footprint Drawing
