Sales: 408-778-9952 | General: 408-778-4200 | Fax: 408-778-4300
Sales & Customer Support: [email protected]
Tech Support: [email protected]
MPDW-10110M2
10 – 110 GHz MMIC 2-way Power Divider/Combiner
The MPDW-10110M2 is a mmWave 2-way Wilkinson power divider featuring high isolation in our connectorized miniature M2-package enabling operation up to 110 GHz. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. Tight fabrication tolerances result in less unit-to-unit variation than traditional power divider technologies, allowing for accurate simulations using the provided S3P file taken from measured production units. Power dividers are passive reciprocal devices that can be used either as power combiners or as power dividers. The MPDW-10110M2 is available as a 1.0mm connectorized module.
N/A
| Parameter | Typ | Unit |
|---|---|---|
| Frequency Range | 10 to 110 | GHz |
| Phase Balance | 5 | ° |
| Excess Insertion Loss | 3 | dB |
| No. Ways | Wilkinson 1:2 | - |
| Amplitude Balance | 0.25 | dB |
| Isolation | 20 | dB |
Summary only – refer to the Electrical Specifications, Absolute Maximum Ratings, and Recommended Operating Range tables for complete details.
| Part Number | Description | Package | Connectors | Green Status | Product Lifecycle | Export Classification |
|---|---|---|---|---|---|---|
| MPDW-10110M2 | 10 – 110 GHz MMIC 2-way Power Divider/Combiner | M2 | Standard | REACH RoHS | Released | EAR99 |
The electrical specifications apply at TA=+25°C in a 50Ω system. Min and Max limits are guaranteed at TA=+25°C.
| Parameter | Port Configuration | Test Conditions | Minimum Frequency (GHz) | Maximum Frequency (GHz) | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|---|---|
| Frequency Range | - | - | 10 | 110 | - | - | - | GHz |
| Amplitude Balance | - | - | 10 | 110 | - | 0.25 | - | dB |
| Excess Insertion Loss 1 | - | - | 10 | 110 | - | 3 | - | dB |
| Impedance | - | - | 10 | 110 | - | 50 | - | Ω |
| Isolation | - | - | 10 | 110 | - | 20 | - | dB |
| Nominal Phase Shift | - | - | 10 | 110 | - | 0 | - | ° |
| Nominal Power Splitting | - | - | 10 | 110 | - | 3 | - | dB |
| Phase Balance | - | - | 10 | 110 | - | 5 | - | ° |
| Return Loss | - | - | 10 | 110 | - | 10 | - | dB |
[1] Excess Insertion Loss = (Input Port to Common Port Insertion Loss) - 3dB
The Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. If these limits are exceeded, the device may be inoperable or have a reduced lifetime.
| Parameter | Maximum Rating | Unit |
|---|---|---|
| DC Current | 140 | mA |
| Maximum Operating Temperature | 100 | °C |
| Maximum Storage Temperature | 125 | °C |
| Minimum Operating Temperature | -55 | °C |
| Minimum Storage Temperature | -65 | °C |
| Power Handling, at any Port | 1 | W |
| Parameter | Details | Rating |
|---|---|---|
| ESD | 250 to < 500 Volts | HBM Class 1A |
| Dimensions | - | 21.65 x 26.31 mm |
A bottom-up view of the MPDW-10110M2’s M2 package outline drawing is shown below. The MMIC Power dividers are passive reciprocal devices allowing either power splitting or power combining.
| Port | Function | Connector Type | Description | DC Equivalent Circuit |
|---|---|---|---|---|
| GND | Ground | - | M2 package ground provided through metal housing and outer coax conductor. |  |
| In 1 | Input 1 | 1.0F | The Input 1 port is DC short to the other two ports and open to ground. |  |
| In 2 | Input 2 | 1.0F | The Input 2 port is DC short to the other two ports and open to ground. | |
| Output | Output | 1.0F | The common port is DC short to the other two ports and open to ground. | |
| Port | Function | Connector Type | Description | DC Equivalent Circuit |
|---|---|---|---|---|
| GND | Ground | - | M2 package ground provided through metal housing and outer coax conductor. | |
| In | Input | 1.0F | The common port is DC short to the other two ports and open to ground. | |
| Out1 | Output 1 | 1.0F | The output 1 port is DC short to the other two ports and open to ground. | |
| Out2 | Output 2 | 1.0F | The output 2 port is DC short to the other two ports and open to ground. | |
Download : Outline 3D Drawing Outline 3D STP
| Revision Code | Revision Date | Comment |
|---|---|---|
| - | 2023-05-01 | Initial Datasheet Release |
MARKI MICROWAVE, LLC., (“MARKI”) PROVIDES TECHNICAL SPECIFICATIONS AND DATA (INCLUDING DATASHEETS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, AND OTHER INFORMATION AND RESOURCES “AS IS” AND WITH ALL FAULTS. MARKI DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
These resources are intended for developers skilled in the art designing with Marki products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards and other requirements. Marki makes no guarantee regarding the suitability of its products for any particular purpose, nor does Marki assume any liability whatsoever arising out of your use or application of any Marki product.
Marki grants you permission to use these resources only for development of an application that uses Marki products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Marki intellectual property or to any third-party intellectual property. Marki reserves the right to make changes to the product(s) or information contained herein without notice.
MARKI MICROWAVE, M wave logo, FastSwitch, and T3 MIXER are trademarks or registered trademarks of Marki Microwave, LLC. All other trademarks used are the property of their respective owners.
© 2023, Marki Microwave, LLC
