Sales: 408-778-9952 | General: 408-778-4200 | Fax: 408-778-4300
Sales & Customer Support: [email protected]
Tech Support: [email protected]
MDPX-0407
Passive MMIC DC-4 GHz Diplexer/Reflectionless Filter
The MDPX-0407 is a broadband passive MMIC diplexer, a combination high pass and loss pass filter, capable of multiplexing low frequency DC to 4 GHz and high frequency 7 to 26.5 GHz signals. It can also be used as a reflectionless high pass or low pass filter when terminated with an internal/external 50 Ohm load. Passive GaAs MMIC technology allows production of smaller filter constructions that replace larger form factor circuit board constructions. Tight fabrication tolerances allow for less unit-to-unit variation than traditional filter technologies. The MDPX-0407 is available as a connectorized module and as wire bondable die. Low unit to unit variation allows for accurate simulations using the provided S3P file taken from measured production units.
| Parameter | Typ | Unit |
|---|---|---|
| 30 dBc Low Pass Rejection Point | 53 | dB |
| 1 dBc High Passband | 7 to 26.5 | GHz |
| 1 dBc Low Passband | 0 to 4 | GHz |
Summary only – refer to the Electrical Specifications, Absolute Maximum Ratings, and Recommended Operating Range tables for complete details.
| Part Number | Description | Package | Connectors | Green Status | Product Lifecycle | Export Classification |
|---|---|---|---|---|---|---|
| MDPX-0407 | Passive MMIC DC-4 GHz Diplexer/Reflectionless Filter | UB | Standard | REACH RoHS | Released | EAR99 |
Specifications guaranteed +25°C for UB package, measured in a 50Ω system.
| Parameter | Test Conditions | Minimum Frequency (GHz) | Maximum Frequency (GHz) | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|---|
| 1 dBc High Passband | - | - | - | 7 | - | 26.5 | GHz |
| 1 dBc Low Passband | - | - | - | 0 | - | 4 | GHz |
| 30 dBc Low Pass Rejection Point | DC to 3 GHz | 0 | 3 | 25 | 53 | - | dB |
| Common Port Return Loss | 7 to 26.5 GHz | 7 | 26.5 | 7 | 18 | - | dB |
| Common Port Return Loss | DC to 4 GHz | 0 | 4 | 18 | 22 | - | dB |
| High Pass Filter, Pass Band Insertion Loss | 7 to 26.5 GHz | 7 | 26.5 | - | 0.9 | - | dB |
| High Pass Filter, Pass Band Return Loss | 7 to 26.5 GHz | 7 | 26.5 | 7 | 18 | - | dB |
| Impedance | - | - | - | - | 50 | - | Ω |
| Isolation | 3 to 4 GHz | 3 | 4 | - | 20 | - | dB |
| Isolation | 7 to 26.5 GHz | 7 | 26.5 | 25 | 38 | - | dB |
| Isolation | DC to 3 GHz | 0 | 3 | 25 | 38 | - | dB |
| Low Pass Filter, Pass Band Insertion Loss | DC to 4 GHz | 0 | 4 | - | 0.9 | - | dB |
| Low Pass Filter, Pass Band Return Loss | DC to 4 GHz | 0 | 4 | 18 | 22 | - | dB |
| Low Pass Filter, Stop Band Rejection | 7 to 26.5 GHz | 7 | 26.5 | 25 | 42 | - | dB |
| Parameter | Maximum Rating | Unit |
|---|---|---|
| Maximum Storage Temperature | 100 | °C |
| Maximum Survivable Operating Temperature | 100 | °C |
| Minimum Storage Temperature | -65 | °C |
| Minimum Survivable Operating Temperature | -65 | °C |
| RF Power Handling | 30 | dBm |
| Spec Guaranteed Operating Temperature | 25 | °C |
| Parameter | Details | Rating |
|---|---|---|
| Dimensions | - | 16.26x9.53 mm |
| Port | Function | Connector Type | Description | DC Equivalent Circuit |
|---|---|---|---|---|
| GND | Ground | - | Package ground provided through metal housing and outer coax conductor. |  |
| Port 1 | Input/Common | SMAF | Port 1 is DC short to Port 4 and open to the other two ports and ground. |  |
| Port 2 | RF High Band | SMAF | Port 2 is DC short to ground and open to all other ports. |  |
| Port 3 | RF Low Band | SMAF | Port 4 is DC short to Port 1 and open to the other two ports and ground. | |
Download : Outline 2D Drawing Outline 3D Drawing Outline 3D STP
| Revision Code | Revision Date | Comment |
|---|---|---|
| - | 2021-05-01 | Datasheet initial Release |
| A | 2022-03-01 | CH Wire Bondable Die Added |
DATA SHEET NOTES:
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
MARKI MICROWAVE, LLC., (“MARKI”) PROVIDES TECHNICAL SPECIFICATIONS AND DATA (INCLUDING DATASHEETS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, AND OTHER INFORMATION AND RESOURCES “AS IS” AND WITH ALL FAULTS. MARKI DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
These resources are intended for developers skilled in the art designing with Marki products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards and other requirements. Marki makes no guarantee regarding the suitability of its products for any particular purpose, nor does Marki assume any liability whatsoever arising out of your use or application of any Marki product.
Marki grants you permission to use these resources only for development of an application that uses Marki products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Marki intellectual property or to any third-party intellectual property. Marki reserves the right to make changes to the product(s) or information contained herein without notice.
MARKI MICROWAVE, M wave logo, FastSwitch, and T3 MIXER are trademarks or registered trademarks of Marki Microwave, LLC. All other trademarks used are the property of their respective owners.
© 2021 - 2022, Marki Microwave, LLC
