Rev: - | Copyright © 2026 Marki Microwave LLC.

General Description

The MBAL-0R520BH is a GaAs passive MMIC 2:1 balun (unbalanced to balanced transformer) that features excellent 28 dB common mode rejection and low 4 dB insertion loss as a mode converter over a 0.5 to 20 GHz operational bandwidth. The MBAL-0R520BH can be used for performing measurements on high frequency differential devices, including cables, microchips, and communication systems. It is an excellent choice for test & measurement benches, high speed analog-to-digital converters, balanced receivers, baseband digital modulations, and signal integrity. For accurate simulations, use the provided S3P file taken from measured production units. The MBAL-0R520BH is packaged in a small form-factor, high-performance connectorized housing for easy integration into test setups and system signal paths.

Features

  • 2:1 Impedance Ratio (50Ω Common to 100Ω Differential)
  • Broadband, 0.5 GHz to 20 GHz
  • Amplitude Balance, 0.5 dB Typical
  • Phase Balance, 3.6º Typical
  • Common Mode Rejection, 28 dB Typical
  • Compact 1.1 x 0.8 Inch, 3-Port Connectorized Package

Functional Block Diagram

Block Diagram

Electrical Performance Summary

ParameterTypUnit
Frequency Range0.5 to 20GHz
Insertion Loss as a Mode Converter 4dB
Phase Balance 3.6°
Amplitude Balance 0.5dB
Impedance Ratio 2:1-
Common Mode Rejection 28dB

Summary only – refer to the Electrical Specifications, Absolute Maximum Ratings, and Recommended Operating Range tables for complete details.

Part Ordering Options

Part NumberDescriptionPackageConnectorsGreen StatusProduct LifecycleExport Classification
MBAL-0R520BH0.5 - 20 GHz Passive MMIC 2:1 BalunBH-

REACH

RoHS

ReleasedEAR99

Table Of Contents

Mixed Mode Scattering Parameters

Mixed mode scattering parameters are used to characterize differential circuits. For baluns, this means that the 0° and 180° ports become a single 100Ω differential port and the common port remains the same 50Ω common port. The two-port s-parameters of the balun are then characterized based on differential (d), common mode (c), or single-ended (s) signals. For example: Scs12 is the Common output response given a single ended input.

Insertion loss as a mode converter graph for MBAL-0R520BH
Differential port return loss graph for MBAL-0R520BH
Insertion loss of a common mode signal graph for MBAL-0R520BH
Reflection converted between differential and common modes graph for MBAL-0R520BH
Return loss of a common mode signal graph for MBAL-0R520BH
Unbalanced port return loss graph for MBAL-0R520BH

Typical Performance Scattering Parameters

Common to output port insertion loss and output to output port Isolation graph for MBAL-0R520BH
Return Loss (dB) graph for MBAL-0R520BH
Non-Adjacent Isolation (dB) graph for MBAL-0R520BH
Amplitude Balance (dB) graph for MBAL-0R520BH
Phase Balance (°) graph for MBAL-0R520BH
Common Mode Rejection graph for MBAL-0R520BH

Specifications

Electrical Specifications

The electrical specifications apply at TA=+25°C in a 50Ω system. Min and Max limits are guaranteed at TA=+25°C.

ParameterTest ConditionsMinimum
Frequency
(GHz)
Maximum
Frequency
(GHz)
MinTypMaxUnit
Frequency Range-0.5 20---GHz
Insertion Loss as a Mode Converter -0.5 20-4-dB
Impedance Ratio -- --2:1--
Amplitude Balance -0.5 20-0.5-dB
Phase Balance -0.5 20-3.6-°
Nominal Phase Shift -0.5 20-180-°
Common Mode Rejection -0.5 20-28-dB
Isolation -0.5 20-8-dB
Common Port Return Loss -0.5 20-16-dB
Output Return Loss -0.5 20-11-dB
Impedance -0.5 20-50-Ω

Absolute Maximum Ratings

ParameterMaximum RatingUnit
Maximum Operating Temperature 100°C
Maximum Storage Temperature 125°C
Minimum Operating Temperature -55°C
Minimum Storage Temperature -65°C
RF Power Handling 37dBm

Package Information

ParameterDetailsRating
ESD250 to < 500 VoltsHBM Class 1A
WeightPackage name: BH12.2g
Dimensions-29.01 x 19.84 mm

Port Configuration and Functions

Port Diagram

A top-down view of the MBAL-0R520BH package outline drawing is shown below. Marki baluns are passive reciprocal devices allowing either single ended to differential or differential to single ended conversion.

Diagram of the port configuration for MBAL-0R520BH

Port Functions

PortFunctionConnector TypeDescriptionDC Equivalent
Circuit
Port 2Common Port / In (Unbalanced) 2.92FThe common port is DC short to ground.Equivalent circuit for the Common Port / In (Unbalanced)
Port 1Out 1 / 0° Port (Balanced) 2.92FThe 0° port is DC short to ground.Equivalent circuit for the Out 1 / 0° Port (Balanced)
Port 3Out 2 / 180° Port (Balanced) 2.92FThe 180° port is DC open.Equivalent circuit for the Out 2 / 180° Port (Balanced)
GNDGround -BH package ground provided through metal housing and outer coax conductor.Equivalent circuit for the Ground

Mechanical Data

Outline Drawing

Download : Outline 2D Drawing

Outline Drawing

Revision History

Revision CodeRevision DateComment
-2026-11-19Initial Release

DISCLAIMER

MARKI MICROWAVE, LLC., (“MARKI”) PROVIDES TECHNICAL SPECIFICATIONS AND DATA (INCLUDING DATASHEETS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, AND OTHER INFORMATION AND RESOURCES “AS IS” AND WITH ALL FAULTS. MARKI DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.

These resources are intended for developers skilled in the art designing with Marki products. You are solely responsible for (1) selecting the appropriate products for your application, (2) designing, validating, and testing your application, and (3) ensuring your application meets applicable standards and other requirements. Marki makes no guarantee regarding the suitability of its products for any particular purpose, nor does Marki assume any liability whatsoever arising out of your use or application of any Marki product.

Marki grants you permission to use these resources only for development of an application that uses Marki products. Other reproduction or use of these resources is strictly prohibited. No license is granted to any other Marki intellectual property or to any third-party intellectual property. Marki reserves the right to make changes to the product(s) or information contained herein without notice.

MARKI MICROWAVE, M wave logo, FastSwitch, and T3 MIXER are trademarks or registered trademarks of Marki Microwave, LLC. All other trademarks used are the property of their respective owners.

© 2026, Marki Microwave, LLC