MM2D-0528SCSM-2_GaAs MMIC Differential IF Triple Balanced Mixer

Part Number	Description	Package	Packing Size	Green Status	Product Lifecycle	Export Classification
MM2D-0528SCSM-2	GaAs MMIC Differential IF Triple Balanced Mixer	QFN	-	REACH RoHS	Released	EAR99
EVB-MM2D-0528SC	Evaluation Board, GaAs MMIC 5-28 GHz Differential IF Triple Balanced Mixer	EVB	-	REACH RoHS	Released	EAR99
MM2D-0528S-2-TR	Tape and Reel, GaAs MMIC Differential IF Triple Balanced Mixer	QFN	13"	REACH RoHS	Released	EAR99

Part Number	Description	Package	Packing Size	Green Status	Product Lifecycle	Export Classification
MM2D-0528SCSM-2	GaAs MMIC Differential IF Triple Balanced Mixer	QFN	-	REACH RoHS	Released	EAR99
EVB-MM2D-0528SC	Evaluation Board, GaAs MMIC 5-28 GHz Differential IF Triple Balanced Mixer	EVB	-	REACH RoHS	Released	EAR99
MM2D-0528S-2-TR	Tape and Reel, GaAs MMIC Differential IF Triple Balanced Mixer	QFN	13"	REACH RoHS	Released	EAR99

Revision History

Revision Code	Revision Date	Comment
-	2022-11-01	Datasheet Initial Release

Port Configuration and Functions

Port Diagram

A bottom-up view of the MM2D-0528SCSM’s SM package outline drawing is shown below. The MM2D-0528SCSM has the input and output ports given in Port Functions. The MM2D-0528SCSM can be used in either an up or down conversion. Configuration A/B refer to the same part number (MM2D-0528SCSM) used in one of two different ways for optimal spurious performance. For configuration A, input the LO into pin 4, use pin 15 for the RF. For configuration B, input the LO into pin 4, use pin 15 for the RF.

Diagram of the port configuration for MM2D-0528SCSM-2

Port Functions

Configuration A

Port	Function	Description
GND	Ground	SM package ground path is provided through the ground paddle.
Pin 10	IF-1	Pins 10 is DC coupled to the diodes.
Pin 15	RF	Pin 15 is DC short for the SM package.
Pin 4	LO	Pin 4 is DC short for the SM package.
Pin 9	IF-2	Pin 9 is DC coupled to the diodes.

Configuration B

Port	Function	Description
GND	Ground	SM package ground path is provided through the ground paddle.
Pin 10	IF-1	Pins 10 is DC coupled to the diodes.
Pin 15	LO	Pin 15 is DC short for the SM package.
Pin 4	RF	Pin 4 is DC short for the SM package.
Pin 9	IF-2	Pin 9 is DC coupled to the diodes.

Specifications

Absolute Maximum Ratings

The Absolute Maximum Ratings indicate limits beyond which damage may occur to the device. If these limits are exceeded, the device may be inoperable or have a reduced lifetime.

Parameter	Maximum Rating	Unit
Maximum Operating Temperature	100	°C
Maximum Storage Temperature	125	°C
Minimum Operating Temperature	-40	°C
Minimum Storage Temperature	-40	°C
Pin 10 DC Current	15	mA
Pin 15 DC Current	20	mA
Pin 4 DC Current	20	mA
Pin 9 DC Current	15	mA
Power Handling, at any Port	33	dBm

Package Information

Parameter	Details	Rating
ESD	250 to < 500 Volts	HBM Class 1A
Dimensions	-	4 x 4 mm
Moisture Sensitivity Level	-	MSL 1

Recommended Operating Conditions

The Recommended Operating Conditions indicate the limits, inside which the device should be operated, to guarantee the performance given in Electrical Specifications Operating outside these limits may not necessarily cause damage to the device, but the performance may degrade outside the limits of the electrical specifications. For limits, above which damage may occur, see Absolute Maximum Ratings.

Parameter	Min	Nominal	Max	Unit
Ambient Temperature	-40	25	100	°C
LO Input Power	23	28	30	dBm

Electrical Specifications

The electrical specifications apply at TA=+25°C in a 50Ω system. Typical data shown is for the connectorized EVAL package mixer† used with a typical +28dBm sine wave LO. Min and Max limits apply only to our connectorized units and are guaranteed at TA=+25°C.

Parameter	Port Configuration	Test Conditions	Min	Typ	Max	Unit
Conversion Loss ¹	A	RF/LO = 5 - 28 GHz I = 0.2 – 12 GHz	-	12	-	dB
Conversion Loss ²	A	RF/LO = 5 - 28 GHz I = DC – 0.2 GHz	-	10	-	dB
Input IP3	A	RF/LO = 5 - 28 GHz I = DC – 0.2 GHz	-	31	-	dBm
Isolation, LO to IF	A	IF/LO = 5 - 28 GHz	-	40	-	dB
Isolation, LO to RF	A	RF/LO = 5 - 28 GHz	-	36	-	dB
Isolation, RF to IF	A	RF/IF = 5 - 28 GHz	-	41	-	dB
Noise Figure ³	A	RF/LO = 5 - 28 GHz I = DC – 0.2 GHz	-	10	-	dB
Conversion Loss ⁴	B	RF/LO = 5 - 28 GHz I = 0.2 – 12 GHz	-	10	-	dB
Conversion Loss ⁵	B	RF/LO = 5 - 28 GHz I = DC – 0.2 GHz	-	9	-	dB
Input IP3	B	RF/LO = 5 - 28 GHz I = DC – 0.2 GHz	-	28	-	dBm
Isolation, LO to IF	B	IF/LO = 5 - 28 GHz	-	44	-	dB
Isolation, LO to RF	B	RF/LO = 5 - 28 GHz	-	42	-	dB
Isolation, RF to IF	B	RF/IF = 5 - 28 GHz	-	37	-	dB
Noise Figure ⁶	B	RF/LO = 5 - 28 GHz I = DC – 0.2 GHz	-	9	-	dB
IF Frequency Range	-	-	5	-	28	GHz
Input 1 dB Gain Compression Point (P1dB)	-	-	-	19	-	dBm
LO Frequency Range	-	-	5	-	28	GHz
RF Frequency Range	-	-	5	-	28	GHz

Parameter	Port Configuration	Test Conditions	Min	Typ	Max	Unit
Conversion Loss ¹	A	RF/LO = 5 - 28 GHz I = 0.2 – 12 GHz	-	12	-	dB
Conversion Loss ²	A	RF/LO = 5 - 28 GHz I = DC – 0.2 GHz	-	10	-	dB
Input IP3	A	RF/LO = 5 - 28 GHz I = DC – 0.2 GHz	-	31	-	dBm
Isolation, LO to IF	A	IF/LO = 5 - 28 GHz	-	40	-	dB
Isolation, LO to RF	A	RF/LO = 5 - 28 GHz	-	36	-	dB
Isolation, RF to IF	A	RF/IF = 5 - 28 GHz	-	41	-	dB
Noise Figure ³	A	RF/LO = 5 - 28 GHz I = DC – 0.2 GHz	-	10	-	dB
Conversion Loss ⁴	B	RF/LO = 5 - 28 GHz I = 0.2 – 12 GHz	-	10	-	dB
Conversion Loss ⁵	B	RF/LO = 5 - 28 GHz I = DC – 0.2 GHz	-	9	-	dB
Input IP3	B	RF/LO = 5 - 28 GHz I = DC – 0.2 GHz	-	28	-	dBm
Isolation, LO to IF	B	IF/LO = 5 - 28 GHz	-	44	-	dB
Isolation, LO to RF	B	RF/LO = 5 - 28 GHz	-	42	-	dB
Isolation, RF to IF	B	RF/IF = 5 - 28 GHz	-	37	-	dB
Noise Figure ⁶	B	RF/LO = 5 - 28 GHz I = DC – 0.2 GHz	-	9	-	dB
IF Frequency Range	-	-	5	-	28	GHz
Input 1 dB Gain Compression Point (P1dB)	-	-	-	19	-	dBm
LO Frequency Range	-	-	5	-	28	GHz
RF Frequency Range	-	-	5	-	28	GHz